Universal Electronics ATLAS CABLE 4-DEVICE User's Guide download pdf (Page 3)

www.urcsupport.com

3

QUICK START GUIDE

Welcome to the Polaris Remote Control Quick

Start Guide. To start using your remote control

right away, just follow the steps below.

Note: This Quick Start Guide assumes your

Polaris Remote Control has battery power. If

your remote control does not have power,

please refer to the section, See “Installing

Batteries” on page 11.

Your Polaris Remote Control was designed for

comfort, convenience, and simplicity. Use the

TV and CBL keys to turn the power on and off

for your television and cable box. The Volume

and Mute keys are locked to control your TV’s

volume, and all other functions control your

cable box.

PROGRAM CONTROL OF YOUR

TELEVISION AND CABLE BOX

You can control your television and your cable

box with your Polaris Remote Control. Follow

these steps to program device control.

Note: Please refer to “Device Table” on

page 11 to find out which devices you

can program onto each device key.

1. Turn on the device you wish to

control.

3. Use the “Manufacturer’s Codes

(Códigos del Fabricante)” on page 39

to locate the type of device and its

brand name. Enter the first four-digit

code for that device and brand. If the

code is correct, the device key blinks

twice. If the key emits a single, long

2.

Press the appropriate device key

(either TV or CBL). The key blinks

once. Then press and hold the SETUP

key until the selected device key

blinks twice.

1 2 3 4 5 6 7 8 ... 51 52

Comments to this Manuals

No comments